---
title: Ex4: Edit your page in DA
slug: saga-hol/ex4-edit-your-page-in-da
createdAt: 2026-08-04T12:51:30.892Z
---

### Introduction

*In this exercise, you will enhance your FAQ page by creating a new FAQ block, adding a heading, inserting a Cards Icon block from the library, and adding an asset. You will then preview the completed page to verify that all content and blocks are displayed correctly.*

## Step 1 — Add a block on your own

*We want to add an faq block similar to what we had in the template.&#x20;*

1. First, place your cursor right after the faq table, and let's **add a Section** to divide our Blocks:&#x20;

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/BJXj1Ev9Www6lK-1xHOl__image.png" size="100" isUploading="false" width="1119" height="791" darkWidth="1119" darkHeight="791" showCaption="false" indent="1"}

2. This will create a new section. **Place the cursor in between the two sections:&#x20;**

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/utTrhph-piaa1R-KaN-Oj_image.png" size="100" isUploading="false" width="901" height="216" darkWidth="901" darkHeight="216" showCaption="false" indent="1"}

3. **Click on Block&#x20;**&#x74;o insert a new Block in the page:&#x20;

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/zBbHHaaP3AxGIwU1-57g7_image.png" size="50" isUploading="false" width="287" height="183" darkWidth="287" darkHeight="183" showCaption="false" indent="1"}

:::hint{type="info" indent="1"}
**Blocks are created using tables.** The first row (1) of the table identifies the block. Block content is in (2)

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/YiuikjVi95YAzyybFaSj__image.png)
:::

4. **Rename columns to faq:**

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/4ygyMvWJiLvzWL5wXtxQC_image.png" size="100" isUploading="false" width="1411" height="360" darkWidth="1411" darkHeight="360" showCaption="false" indent="1"}

:::hint{type="info" indent="1"}
That way, DA knows that this table corresponds to the faq block; you can see it rendered on the right.&#x20;
:::

5. **Add the following** question and answer:&#x20;

| `How do I get help during the lab?` | `Contact the lab facilitator or use the support instructions provided with the exercise.` |
| ----------------------------------- | ----------------------------------------------------------------------------------------- |

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/BJvsYkwJ3C7ZbHwbQtf22_image.png" size="100" isUploading="false" width="1424" height="384" darkWidth="1424" darkHeight="384" showCaption="false" indent="1"}



## Step 2 — Add some text to the page

1. **Place your cursor&#x20;**&#x61;bove the faq table, and **type`/h`**&#x74;o select and **insert Heading 2:**

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/nXoXJqfHQKIl_OHxWSesq_image.png" size="100" isUploading="false" width="895" height="358" darkWidth="895" darkHeight="358" showCaption="false" indent="1"}

:::hint{type="info" indent="1"}
If you don't have a space above faq, click on Section, and hit **Enter:**

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/X-GJhGi-0y8BFZTgZXgA1_image.png)

This will create a space for your cursor.
:::

2. **Write the title: `Questions on the lab`**

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/FS-TyrDzhibv471NLJ4bY_image.png" size="100" isUploading="false" width="877" height="374" darkWidth="877" darkHeight="374" showCaption="false" indent="1"}



## Step 3 — Add a block from library

*We want to add some links at the end of our faq page.&#x20;*

1. First, let's **add a Section**. Place your cursor under the faq block, and type `/sec` and hit Enter:

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/2rJkXSj3G4dk4xFeLTooq_image.png" size="100" isUploading="false" width="904" height="383" darkWidth="904" darkHeight="383" showCaption="false" indent="1"}

:::hint{type="info" indent="1"}
If you don't have a space under faq, click on the edge, and a horizontal cursor will appear, take anything to get the spac&#x65;**:**

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/o3i6TXNtSHxT-aM-eEOgV_image.png" size="70" isUploading="false" width="440" height="154" darkWidth="440" darkHeight="154" showCaption="false"}
:::

2. Place your cursor in between the 2 sections:&#x20;

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/OGSgYc4l_Mnr5jlfYumvV_image.png" size="100" isUploading="false" width="891" height="122" darkWidth="891" darkHeight="122" showCaption="false" indent="1"}

3. Go to Library, and **click on the second Blocks:**

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/v11TLcmfE9lIhwV6lnxIE_image.png" size="60" isUploading="false" width="603" height="616" darkWidth="603" darkHeight="616" showCaption="false" indent="1"}

:::hint{type="info" indent="1"}
First Blocks are default blocks available in EDS. Second Blocks contain all the blocks that we created for NatWest using the Experience Modernization Agent.&#x20;
:::

4. Search for **Card Icon**, and click on the preview button:&#x20;

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/b8_V1gVlDEjrV98YJcS_0_image.png" size="50" isUploading="false" width="490" height="585" darkWidth="490" darkHeight="585" showCaption="false" indent="1"}

5. This will let you **preview the block:**

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/Ywq3o8hLOEkbBTyQZBmeL_image.png" size="100" isUploading="false" width="1464" height="807" darkWidth="1464" darkHeight="807" showCaption="false" indent="1"}

6. **Click on Close&#x20;**&#x74;o close the preview. You can also take a moment to preview a few of the other blocks that have been created.&#x20;

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/tbkU8oBYt5proe7kHzwhV_image.png" size="60" isUploading="false" width="276" height="100" darkWidth="276" darkHeight="100" showCaption="false" indent="1"}

7. Click on the **Cards Icon,&#x20;**&#x61;nd **cards-icon** to add the Block element to the page:

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/gweV65R_Ep6htG-FbjES-_image.png" size="70" isUploading="false" width="375" height="134" darkWidth="375" darkHeight="134" showCaption="false" indent="1"}

8. **Close the Block Library**, as we don't need to add other blocks yet:&#x20;

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/Badof5Elb0wo5kVIA2P75_image.png" size="50" isUploading="false" width="447" height="156" darkWidth="447" darkHeight="156" showCaption="false" indent="1"}

9. See our **cards icon** that has been added, with hyperlinks:

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/eV8rpSez7ixDq84RE2o9y_image.png" size="100" isUploading="false" width="1544" height="853" darkWidth="1544" darkHeight="853" showCaption="false" indent="1"}



## Step 4 — Add an asset

*We are missing some illustrations on our page, don't you think? Let's add one.&#x20;*

1. At the top of the page,**&#x20;place your cursor after the paragraph:**

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/0RoF-tqPp7sEft5FM92Re_image.png" size="70" isUploading="false" width="1372" height="660" darkWidth="1372" darkHeight="660" showCaption="false" indent="1"}

2. Then click on **Library:**

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/1_jKymPDPwgZrxzpV5vfr_image.png" size="30" isUploading="false" width="466" height="540" darkWidth="466" darkHeight="540" showCaption="false" indent="1"}

3. And click on **AEM Assets:**

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/JCR0dde9SyOwiyDim6TdQ_image.png" size="40" isUploading="false" width="758" height="650" darkWidth="758" darkHeight="650" showCaption="false" indent="1"}

4. *This will open the **Content Advisor** we already know, and allow us to browse and add content directly from our AEM Assets.&#x20;*
5. **Go to the Natwest-xwalk folder,** if not already in:&#x20;

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/9bfJ1FyalQ-Ew3lbXaVLf_image.png" size="100" isUploading="false" width="3238" height="1822" darkWidth="3238" darkHeight="1822" showCaption="false" indent="1"}

6. Browse, search, and **click on one asset you like:&#x20;**

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/SPx3ntg7xWIBv7jOEbL2V_image.png" size="30" isUploading="false" width="682" height="726" darkWidth="682" darkHeight="726" showCaption="false" indent="1"}

7. On the top right, **click select:&#x20;**

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/jbuIbe1gOAuLvU2sigidP_image.png" size="30" isUploading="false" width="426" height="190" darkWidth="426" darkHeight="190" showCaption="false" indent="1"}

8. Here you have your page full, with a nice asset also displaying!

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/qmKsQ6rgjLmF9A6vPEq99_image.png" size="100" isUploading="false" width="2998" height="1570" darkWidth="2998" darkHeight="1570" showCaption="false" indent="1"}



## Step 5 — Preview the FAQ page

1. When all content of the faq page is ready, click the send icon and click **Preview**:

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/UgCAZp8fxhGFKMKgu-6DL_image.png" size="100" isUploading="false" width="1316" height="387" darkWidth="1316" darkHeight="387" showCaption="false" indent="1"}

2. This will open a new tab for our page to **preview:&#x20;**

::Image[]{src="https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/E51qUglWWJ96YQy0FMxLI_image.png" size="100" isUploading="false" width="1715" height="1330" darkWidth="1715" darkHeight="1330" showCaption="false" indent="1"}



:::hint{type="success"}
## Congratulations!

You have s**uccessfully created a structured FAQ page in Document Authoring.&#x20;**&#x59;ou used standard document content for the page title and introduction, then used a table-based block to organize reusable question-and-answer content. You also previewed the page and validated its content, structure, and presentation.

You are now ready to create additional pages and experiment with other blocks in the sandbox.
:::



:::hint{type="success"}
Want to know more about Document Authoring's **latest updates?** [→ Click Here](https://docs.da.live/about/release-notes)
:::

