---
title: Lab Users
slug: tv-toolbox/lab-users
icon: {"lucideIcon":"UsersRound"}
createdAt: 2026-10-21T14:42:30.900Z
---

These guides walk you through the most common tasks for Lab Users. For the background and the reasoning behind the feature, see **Features > Lab Tooling > Lab Users**.

:::hint{type="info"}
Most actions need the **Configure Lab Users** permission. With only **View Lab Users**, you can open groups and see their details, but you cannot change anything.
:::



## Open Lab Users

1. Navigate to **Lab Tooling** > **Lab Configuration**.
2. Select the **Lab Users** tab.
3. The table lists all lab user groups with their number of users, status, and sync status.

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/vxIv34_Jk12BeZsbNn72-_image.png)

:::hint{type="info"}
If you see a "User Group settings not configured" message, an admin still needs to finish the Lab Tooling configuration. See the Configurations guides.
:::

***

## Create a lab user group

1. On the Lab Users tab, click the **Add Group** button.
2. Enter a **group name**. Use only uppercase letters, numbers, and underscores. The name cannot be changed later.
3. Optionally enter a **Description** to describe what the group is going to be used for.
4. Enter a **Group User Label**. This is the text that follows the user number in every display name.
5. Enter an **email prefix**. It must be unique, because it creates the email addresses (for example `travel-hol-01@...`).
6. Enter the **number of users** you need in this group, between 0 and 99.
7. Enter a **Group User Label**. This is the text that follows the user number in every display name.
8. Choose whether the group is created as **Enabled** or **Disabled**.
9. Enter a **password** that meets the password policy. If the group is created as Disabled, the default disabled password is used.
10. Click **Create** to start the creation of your new group.

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/1selBtQMT5t8wWsh8HWfe_image.png)

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/OwDwDIc5jHSfu6ukwP1ai_image.png)

The group appears in the table. Its **Sync Status** will show as **Pending**, indicating that Adobe has not received the change yet. Participants can sign in once the status shows **Synced**.

:::hint{type="info"}
If the lab is not open yet, create the group as **Disabled** and enable it on the day.
:::

***

## View group details and the lab password

1. In the table, click on the group you want to update.
2. The detail dialog shows the **User Group** section (status, sync status, created at, last modified) and the **Users** section (user count, email, lab password).
3. To see the password, select the option to reveal it next to **Lab Password**.

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/FBWwlUxaRzxh1VfsanouC_image.png)

***

## Enable a group

1. Open the group.
2. In the **Actions** row, select **Enable**.
3. Enter the lab password and confirm.
4. Check the **Sync Status**. Participants can sign in once it shows **Synced**. To speed this up, see *Request a sync*.

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/dsd-d7Z57yatH-Jx8SwDf_image.png)

***

## Request a sync

Changes are made in Microsoft Entra ID right away and reach Adobe on a schedule. If you cannot wait, request a sync.

1. At the top of the Lab Users tab, check the sync bar. It shows the **last sync**, the **estimated next sync**, and the **schedule**.
2. Select **Sync Now**.
3. A dialog will open to allow you to start a sync directly.
4. Wait a couple of minutes, then check the sync status of your group again.

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/zHR16hZtw-pNw7CSbnT0k_adobe-ims-sync-bar.png)

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/acKI9C5cdWXY9Qz5dXRjn_image.png)

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/qfGN8vkdoKBhAfekdHfcQ_image.png)

To check whether a specific group has reached Adobe, open the group and select **Verify Sync Status**.

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/3hYUvhtEbAmWtjz-BhBoL_image.png)

***

## Add or remove users

1. Open the group.
2. Select the option to change the **number of users**.
3. Enter the new total (between 0 and 99) and confirm.

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/iZLN09_6DqJ-1f2VRIN-R_image.png)

:::hint{type="warning"}
When you lower the user count, the **highest-numbered users are removed first**. This cannot be undone.
:::

New users get the group's current password and the next available numbers.

***

## Change the lab password

1. Open the group.
2. Select the option to **set a new password**.
3. Enter a password that meets the password policy and confirm.

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/mSP2s2PXuiK1c3KCCSj6H_image.png)

:::hint{type="info"}
The new password applies to every user in the group.
:::

***

## Personalise users with real names

By default, users are named `Lab user 01`, `Lab user 02`, and so on. Use this guide to give them real names.

1. Prepare a CSV file with a **first name** and a **last name** on each row.
2. Open the group and select **Personalise Users**.
3. Upload your CSV file.
4. Review the preview table. Each row shows a badge:
   - **New**: the user has no personal name yet and will get this one.
   - **Overwrite**: the user already has a name that will be replaced.
   - **Existing**: the user keeps the current name.
5. Select **Apply** to confirm.

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/XxnDpGK7VcBC3TEuAyA-H_image.png)

Names are assigned in alphabetical order of the email address. Only Latin characters are supported, and accented letters are simplified (for example, "ö" becomes "o").

:::hint{type="info"}
You can personalise part of a group and add more names later.
:::

***

## Reset personalisation or change the Group User Label

1. Open the group.
2. Select the option to **reset** the users' names.
3. If needed, enter a new **Group User Label**.
4. Confirm.

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/f77SMIDtdsXKYJTbeHwn8_image.png)

All display names return to the generic format, with the new label if you entered one.

***

## Disable a group after the lab

1. Open the group.
2. In the **Actions** row, select **Disable**.
3. Confirm.

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/1erfQq119119QwexMjxV-_image.png)

When a group is disabled, the password is reset, logged-in users are signed out, and the users are removed from Adobe on the next sync.

***

## Delete a group

1. Make sure the group is **disabled** or has **no users** and has been synced to Adobe IMS.
2. Open the group.
3. In the **Actions** row, select **Delete**.
4. Confirm.

![](https://api.archbee.com/api/optimize/1Jp0iolWv35Z_mkI7oUiT/lFL6iceoqaYzHbMsNqiH0_image.png)

:::hint{type="danger"}
Deleting a group removes all of its accounts. This cannot be undone.
:::

***

## Troubleshooting

| Problem                                    | What to do                                                                                                              |
| ------------------------------------------ | ----------------------------------------------------------------------------------------------------------------------- |
| Participants cannot sign in                | Check that the group is **Enabled** and the **Sync Status** is **Synced**. If not, select **Sync Now** and check again. |
| The group name or email prefix is rejected | Group names allow only uppercase letters, numbers, and underscores. The email prefix must not be used by another group. |
| The password is rejected                   | Check the password policy shown in the dialog and try again.                                                            |
| The group cannot be deleted                | Disable the group first, or remove all its users.                                                                       |
| Buttons are greyed out or missing          | You may only have view access. Ask your admin for **Configure Lab Users**.                                              |
| "User Group settings not configured"       | An admin needs to finish the Lab Tooling configuration.                                                                 |

